Interconnect and the seam

Review the interfaces between boards: the interconnect report, seam/lanes, an assembly as its own product, and cables read from a drawing.

View as Markdown (for AI/KB) Whole knowledge base (llms.txt)

Many faults don’t sit on a single board but in the interface between boards — connectors, cables, mating. Probe’s interconnect part reviews that seam.

The interconnect report

The report goes through the connections across an interface and raises deviations — a pinout that doesn’t match between two sides, missing or mismatched signals. As always, each point is pinned at its connector and carries its source.

Seam and lanes

A seam is the join between two boards or domains; lanes are the grouped paths across it. Probe can show and review them as a unit, so a lane that breaks or changes meaning across the seam becomes visible.

An assembly as its own product

An assembly can be treated as its own product with its own seats and links between the constituent boards — so the review of the whole assembly hangs together, not just board by board.

Cables from a drawing

Cables can be declared from their drawing, so the connection through a cable between two connectors becomes part of the review.


Related: connector families and customer standards and standard packs.

Probe is E-Sharp’s design-review engine. Interface findings cite the actual connectivity.

Book a demo of Probe

Show us your board — we review it and go through the findings together.

Prefer to email? info@esharp.se