Originaldokumentationen är på engelska. Visa som Markdown (för AI/KB)
Note: This describes calibration via the discontinued Windows application Accordion Pilot. The current interface is the browser-based Web UI – Kalibrering. The file format and concepts below still apply.
Introduction
Sometimes calibration is needed. Some modules support a dedicated CALIBRATION channel that exposes one or several settings that can be calibrated.
Guide
Open the calibration menu (the dart-board button) to reveal all modules capable of calibration. The Gain/Offset setting uses the equation of a straight line y = kx + m, where y is the resulting value, k is the gain and m is the offset. The items (keys) that can be adjusted differ between modules — contact your E# representative for details on the calibration procedure for a specific module.
Calibration files
You can view, download and upload the calibration files using the file browser. The format is comma-separated values and opens in a text editor or Microsoft Excel:
"Key","Gain","Offset"
"ISET1","0.9154731066666666","0"
"ISET2","0.9198316944444445","0"
"IMEAS1","0.4685628448862471","0"
"IMEAS2","0.47142800955457487","0"
"VMEAS1","10.06060620888059","0"
"VMEAS2","10.004614857007745","0"
"VREM1","10.019927437962723","0"
"VREM2","10.029629995796423","0"
From firmware 5.17, calibration data lives in the board’s IDPROM (UserData region) so it travels with the hardware; tables too large for the IDPROM keep using a CSV file.