Firmware

Visa firmware-version och uppdatera stationens firmware, samt starta/stoppa Accordion-tjänsten. Uppdatering via SSH från repo.

Originaldokumentationen är på engelska. Visa som Markdown (för AI/KB)

Note: This page describes firmware management via Accordion Shell / the discontinued Windows Pilot. The current interface is the browser-based Web UI – Firmware, which installs signed releases with automatic rollback.

Overview

Firmware management lets you view the installed firmware, update the device firmware, and control the Accordion service. The firmware operations connect to the device over SSH.

Firmware updates

An update downloads the firmware from a repository, stops the Accordion service, installs the new firmware, restarts the service and verifies the new version. It typically takes 30 seconds to 2 minutes.

accordionshell firmware --host 192.168.1.100 --repo "https://custom-server.com/firmware" --version "v3.0.0"

The default repository is https://esharp.blob.core.windows.net/accfirmware.

Service control

accordionshell firmware --host 192.168.1.100 --stop   # stop the Accordion service

Stopping the service disconnects all clients and disables hardware access — use it to prepare for an update or for maintenance, then start it again afterwards.

During an update

Do not interrupt an update: don’t power off the device, disconnect the network or close the terminal. Updates take time and progress may pause briefly. Ensure stable power and a reliable network.

Version numbering

Releases use vX.Y.Z — major (may include breaking changes), minor (new features, backward compatible) and patch (bug fixes). Use stable releases in production.

After an update

Verify the version, reconnect, check the channel list loads, test module loading, aliases and bus communications, and review the logs. If an update fails or causes issues, roll back to the previous version, restore configuration (alias files, modules, settings) and contact E-Sharp support with the captured logs.

Troubleshooting

  • Update fails — check the network and that the device is reachable over SSH, confirm the repository URL, ensure the service can be stopped, and that the device has disk space. Retry after a transient network issue.
  • Cannot connect — ping the device, verify it is powered and online, and that the IP configuration is correct.
  • Version unchanged — confirm the update completed without errors and the service restarted; disconnect and reconnect, or check the device logs.

Boka en demo av Probe

Visa oss ditt kort — vi granskar det och går igenom fynden tillsammans.

Föredrar du att mejla? info@esharp.se