# Kalibrering

> Så kalibreras moduler som exponerar en CALIBRATION-kanal — gain/offset (y = kx + m) och kalibreringsfilernas CSV-format.

_Källa: E-Sharp (esharp.se) · Accordion Kalibrering & firmware_


> **Note:** This describes calibration via the discontinued Windows application Accordion Pilot. The current interface is the browser-based [Web UI – Kalibrering](/accordion/support/docs/webui-kalibrering). The file format and concepts below still apply.

## Introduction

Sometimes calibration is needed. Some modules support a dedicated `CALIBRATION` channel that exposes one or several settings that can be calibrated.

## Guide

Open the calibration menu (the dart-board button) to reveal all modules capable of calibration. The Gain/Offset setting uses the equation of a straight line **y = kx + m**, where y is the resulting value, k is the gain and m is the offset. The items (keys) that can be adjusted differ between modules — contact your E# representative for details on the calibration procedure for a specific module.

## Calibration files

You can view, download and upload the calibration files using the file browser. The format is comma-separated values and opens in a text editor or Microsoft Excel:

```
"Key","Gain","Offset"
"ISET1","0.9154731066666666","0"
"ISET2","0.9198316944444445","0"
"IMEAS1","0.4685628448862471","0"
"IMEAS2","0.47142800955457487","0"
"VMEAS1","10.06060620888059","0"
"VMEAS2","10.004614857007745","0"
"VREM1","10.019927437962723","0"
"VREM2","10.029629995796423","0"
```

From firmware 5.17, calibration data lives in the board's IDPROM (UserData region) so it travels with the hardware; tables too large for the IDPROM keep using a CSV file.
