Description
The module command manages hardware modules in the Accordion system. It allows you to load, unload, configure, and inspect modules and their settings.
Syntax
module [options]
Optional Options
| Option | Short | Description |
|---|---|---|
--module |
-m |
The module name to activate/deactivate |
--file |
-f |
Path to the file containing module definitions |
--rename |
-r |
Clone and rename the module before loading |
--key |
-k |
Key for initial data to change (must be paired with value) |
--value |
-v |
Value for initial data to change (must be paired with key) |
--deactivate |
-d |
Flag to deactivate (unload) the module |
Examples
module
module --module "PMBus_Engine"
module --module "PMBus_Engine" --file "C:\configs\modules.xml"
module --module "I2C_Device" --rename "I2C_Device_Clone"
module --module "ADC_Module" --key "SampleRate" --value "1000"
module --module "PMBus_Engine" --deactivate
Output Format
Available Modules Section
Available Modules:
PMBus_Engine
AssemblyPath : additional/PmbusEngine/PMBusEngine.dll
ClassName : Pmbus
Namespace : PmbusEngine
ImageName : pmbus.png
InitialData :
I2CAddress : 0x50
DeviceType : LTC3880
Loaded Modules & Affected Channels
Loaded Modules:
PMBus_Engine
GPIO_Controller
Affected channels:
PMBus_Engine.VOUT_COMMAND
PMBus_Engine.IOUT_MEASURED
Loading Behavior
When loading a module: if no file specified, uses existing module definitions; if file specified, reads from file; if rename specified, creates a clone with new name; if key/value specified, overrides InitialData; enables the module, loads it into the hardware manager, refreshes the channel list, and displays affected channels.
Cloning Modules
Cloning allows multiple instances of the same module:
module -m "I2C_Device" -r "I2C_Dev_0x50" -k "Address" -v "0x50"
module -m "I2C_Device" -r "I2C_Dev_0x51" -k "Address" -v "0x51"
Notes
- Requires an active connection (use
initfirst) - Key and value must be provided together
- Loading modules refreshes the channel list
- Changes persist until reset or manual unload
Error Handling
- Module not found: Module doesn’t exist in available modules list
- Key without value: Key and value must be provided together
- Module already loaded: Cannot load duplicate module (use rename)
- Unload failed: Module may be in use or dependencies exist