Note: This page describes channel handling in the discontinued Windows application Accordion Pilot. The current interface is the browser-based Web UI – Channel Management; the concepts below apply to it and to Accordion Shell as well.
Overview
The Channels view is the primary interface for interacting with Accordion hardware. Channels represent individual hardware endpoints such as GPIO pins, ADC inputs, I2C buses, power supplies and audio outputs. It lets you browse, search, read, write and monitor all available channels.
Channel list
The channel list shows these columns:
| Column | Description |
|---|---|
| NetName | Technical channel identifier (e.g. CH_GPIO_01, I2C_BUS_0) |
| Alias | User-friendly name from a loaded alias file |
| Group Name | Logical grouping of related channels |
| Channel Type | Hardware type (GPIO, ADC, DAC, I2C, Audio, …) |
| Capability | Supported operations (Read, Write, ReadWrite, Execute) |
| Direction | Current direction for bidirectional channels (Input/Output) |
| Description | Channel description |
| Device Name | Associated device or module |
| Value | Current value (when polling is enabled) |
The grid supports sorting (click a header), grouping (drag a header to the group panel), filtering (a find panel, with wildcard and regex) and column customisation.
Reading values
Read a value manually by double-clicking a row or via the context menu (Get Value). Enable automatic polling from the toolbar and set a poll interval (default 500 ms; 100–1000 ms recommended). Lower intervals mean more network traffic — poll only the channels you need, and disable polling when not required.
Writing values
Right-click a channel → Set Value. Accepted value formats depend on the channel: booleans (true/false/1/0/on/off), numbers (decimal, sometimes hex 0x1A), strings, and enums (from a dropdown). For batch writes, use Accordion Shell:
accordionshell set --channel "CH1" --value "1"
accordionshell set --channel "CH2" --value "2"
Configuration & direction
Some channels support runtime configuration (GPIO pull/drive, ADC sample rate/resolution, I2C clock speed/timeout, audio format). For bidirectional channels you can change the direction between Input and Output; an input reads an external signal, an output writes a value to the pin.
Groups & aliases
Load an alias file to give channels readable names and GroupName values for logical grouping:
<Channel NetName="CH_GPIO_01" Alias="LED_Red" GroupName="LEDs" />
<Channel NetName="CH_ADC_01" Alias="Voltage_3V3" GroupName="PowerMon" />
Numeric results & charts
For numeric channels, open a numeric-results view for statistics (min, max, mean, std dev) and a histogram, or add the channel to the chart to plot it over time. For detailed numeric analysis from the command line, use accordionshell num.
Troubleshooting
- Values not updating — verify the connection, that the channel supports Read, and that polling is enabled.
- Cannot write — verify the channel supports Write, the value format and range.
- Too many channels — filter by name, type or group, or load an alias file with groups.