Firmware releases

Firmware releases up to and including 5.19 with changes and fixes. Release notes for 6.0 and later are in the Pilot Web UI.

View as Markdown (for AI/KB)

Release notes for firmware 6.0 and later are published in the Pilot Web UI, not here. This table covers releases up to 5.19.

Version Status Description
5.19 Release Fixed — Range switching on the Precision Current PSU (ESH10000690): switching HIGH_RANGE with a set-point above the target range could deliver ~2× the commanded current while reporting ~1/10 of the real value, with no error. A range change is now all-or-nothing and a non-expressible set-point is refused, naming the channel and value. Refused set-points are now discarded (previously kept and silently applied on the next range change). Unparseable analog-output values are now refused (previously written as 0 V). Alias files with unusable rows now apply every row they can and report the failures together; an export can be reloaded into the unit it came from. Clients can connect when the network has no address at startup. Changed — far more useful log files (full date per line, INFO+ kept, 20 files retained); HCI clock generator and edge counter supported; register-map range rows get per-element addresses; TPS23881 PoE watchdog arming fixed; Node-RED dashboard removed from the image. Known limitation — in low range the advertised maxima aren’t reachable (current ~296 mA vs 600 mA, voltage ~24.07 V vs 25 V); use high range above them.
5.18 Release Active Load ESH10000536: MAX_JOULES is now a read/write CONF channel (Ws, 10–10000), replacing the hard-coded 250 Ws budget; independent 100 °C thermal shutdown disables both loads; ITempReporter implemented so the chassis regulator sees the module temperature; fan runs on until the module drops below 40 °C.
5.17 Release Calibration moved from per-board CSV files into the board’s IDPROM UserData region, so it travels with the hardware; existing calibrations migrate automatically on first boot. Tables too large for the IDPROM (e.g. ESH10000535, 94 rows) keep using a CSV. Ten modules share one calibration implementation (ESH10000517, 533, 535, 536, 540, 556, 568, 590, 662, 690). New module ESH10000690 (Precision Light Table PSU).
5.16 Release Power/PMBus seeding and NVM-restore resync; ESH10000662 PSU refinements; MAX6650 fan control fixes; new MPM54304 and TMP236 devices; MicroHAPS/HCI deterministic cold-start; short I2C/SPI reads now fail loudly instead of truncating; BootConfig atomic write with self-heal; mDNS hostname pinned to the static IP.
5.15.0 Release CRPS power-supply capability registers advertised to the GUI; max output current derived from MFR_POUT_MAX; MicroHAPS I2C bus recovery; ESH10000662 exposed as two PowerSupply instruments (CH1/CH2) with scoped per-channel ADC acquisition and setpoints clamped to 0–25 V / 0–600 mA.
5.14.0 Release New MicroHAPS handler (FTDI/I²C/JTAG bring-up) and Snowball extension (Lattice CPLD GPIO expander); CRPS migrated to Smdn.Devices.Mcp2221A; ESH10000662 gains sampled acquisition with a configurable sample count and TrimmedMean result; new AD5593R TrimmedMean result type; new APDS9306 light sensor. Fixes to CRPS PMBus GetStatus and module disposal on unload.
5.13.0 Release USB port enable/disable (see boot.config); audit endpoint reveals who connected when; guard for ratiometric values outside 0–1.
5.12.0 Release Fix nmcli privilege errors when running as the accordion user (commands now via sudo); graceful handling of blank service entries in boot.config; accordion.service systemd unit fixes.
5.11.0 Release Firmware-ready for LED Zeppelin project; fixed a recursion bug when resetting the system; fixed an overflow bug in PMBus.
5.10.0 Release New calibration REST API (/api/calibration/...); Alias/NetName interchangeable on all endpoints; .NET and Python clients add CalibrationGroup; UART configuration exposed; ESH10000590 split ADC/DAC buses with DAC_GAIN and ADC_GAIN; ESH10000662 HIGH_RANGE channel. Several calibration clamp/key fixes.
5.9.0 Release Changed how the UART transaction works through the WebAPI.
5.8.0 Release Bug fix: concurrent access could sometimes interfere.
5.7.0 Release Fix: 5.6.0 had a faulty parameter preventing the service from starting.
5.6.0 Revoked WebAPI race condition on reconnect (503); ESH10000534 PoE RESTART_CLASSIFICATION channel; protocol server IPv4-only binding. (Revoked — see 5.7.0.)
5.4.0 Release .NET 10; fixes for PoE R4, FE R4 and Accordion M1.
5.2.0 Release Communication fixes; Swagger + Node-RED; fully async; mDNS broadcasting; support for Accordion M1.
4.1.1 Release Dual-connection network fallback: DHCP failover cut from 100+ s to 10–12 s, with automatic priority-based selection and dual-addressing (static + DHCP). New diagnostic scripts (quick-network-check.sh, capture-network-diagnostics.sh). Backward compatible with existing boot.config.
4.1.0 Release Boot-configuration updates (see boot.config); audio/video/image engine; engine refactor; protocol-layer optimizations.
4.0.8 Debug — do not install unless instructed Boot-configuration updates; audio/video/image engine; engine refactor; protocol-layer optimizations.

Book a demo of Probe

Show us your board — we review it and go through the findings together.

Prefer to email? info@esharp.se