Chart Viewer

Real-time plotting and history for numeric channels — add channels, set lookback and Y-axis, zoom, measure and export.

View as Markdown (for AI/KB)

Note: This page describes the chart in the discontinued Windows application Accordion Pilot. The current interface is the browser-based Web UI – Chart Viewer; the concepts below apply to it as well.

Overview

The Chart view provides real-time plotting and historical visualisation for numeric channels — for monitoring trends, analysing signal behaviour and debugging time-dependent issues.

Adding channels

Add a channel from the Channels view (right-click → Add to Chart) or from the Chart view (Add Channel). Each channel is a separate series with its own colour; 5–10 channels per chart is a sensible maximum. Remove a series from the legend.

Configuration

  • Lookback points — how many data points to retain. With 500 ms polling, 1000 points ≈ 8 minutes; with 100 ms polling ≈ 2 minutes.
  • Y-axis — auto-scales by default; set a manual range to zoom into a band.
  • Time axis — relative (−60 s … 0 s) or absolute (time of day).
  • Update interval — follows the main polling interval.
  • Clear history — removes all points and starts fresh.

Analysis

Hover for a tooltip (time, channel, value) or enable a crosshair to read all series at one time. Zoom with the mouse wheel or by dragging a rectangle; double-click to reset; pan by dragging. A statistics view gives min, max, mean, std dev and sample count for the visible data. A second Y-axis can carry channels with a different scale (e.g. voltage left, current right).

Export

Export the chart data to CSV/Excel (timestamp + one column per series) or save the chart as an image (PNG/JPEG/BMP) for reports.

Timestamp,CHANNEL_1,CHANNEL_2
2024-01-15 14:30:00,3.3,1.5
2024-01-15 14:30:01,3.31,1.52

Performance

Chart load depends on the number of series, the lookback size and the polling rate. Keep to 5–10 channels and a reasonable lookback (1000–5000 points), clear history periodically, and close the chart view when it is not needed.

Book a demo of Probe

Show us your board — we review it and go through the findings together.

Prefer to email? info@esharp.se