Module ESH10000560

Tone Audio Module

Autonomous audio node — generates and measures line-level audio locally, 96 kSps / 24-bit.

  • 96 kSps / 24-bit, line level on all external interfaces
  • 2 DAC outputs, 4×2 multiplexed ADC inputs, programmable gain
  • Waveforms — sine, square, sawtooth, noise
  • Measurements — frequency, V_rms, V_pp, THD, SNR, computed on the module
  • All DSP local; raw samples are never exposed on the backplane
Price on request
Description

ESH10000560 is a module for line-level audio generation and analysis in the Accordion ecosystem. All sampling, signal processing and measurement happen locally on the module — only configuration commands and finished results are exchanged with Accordion, which keeps backplane bandwidth low and gives deterministic performance. The module works client–server: Accordion is the client that makes requests, the module is the server with audio functions.

Use cases
Audio generation for test and verification.
Line-level audio analysis in production.
Automatic frequency, level and distortion measurements.
Verification of audio subsystems in Accordion-based test systems.
Technical information

Specifications, connections & manual

All technical material on the page — expand a section, or download the whole datasheet as a PDF.

Specifications

Parameter Value
Form factor SO-DIMM
Sample rate 96 kSps
Sample depth 24 bit
Signal level Line level (all external interfaces)
Bus interface UART
GPIO 6 (peripheral control)
Output channels 2 × DAC
Input channels 4 × 2 (multiplexed ADC)
Waveforms Sine, square, sawtooth, noise
Measurements Frequency, V_rms, V_pp, THD, SNR
Output / input gain Programmable
External digital audio Not exposed — internal only (I²S / DSP)

Manual

Architecture

An autonomous audio processing node: generation, acquisition, DSP and measurement all run on the module. Accordion communicates over UART with a command-based protocol for configuration (gain, waveform, channel selection), control (start/stop), and result retrieval. Raw sample streams are never exposed to the backplane.

Generation & measurement

Two DAC channels with independent programmable gain and waveform (sine, square, sawtooth, noise); output runs continuously once configured. Four-by-two multiplexed ADC inputs with programmable gain; measurements (frequency, V_rms, V_pp, THD, SNR) are computed on-module and returned as scalar values.

Limitations

All external audio interfaces are line level only; digital audio (I²S/DSP) is internal; sample rate (96 kSps) and bit depth (24 bit) are fixed.


Pinout

J4–J13 — Audio channels (COAX)

Connector Signal Direction
J4–J7 COAX0–3 Input — ADC channel 0 mux
J8–J11 COAX4–7 Input — ADC channel 1 mux
J12 COAX8 Output — DAC channel 0
J13 COAX9 Output — DAC channel 1

J14 — GPIO / power header (2×5)

Pin Signal Pin Signal
1 5V 2 VDD
3 MPIO0 4 MPIO3
5 MPIO1 6 MPIO4
7 MPIO2 8 MPIO5
9 GND 10 GND
Related

Application notes, cases & news

Insights tagged for this product.

The right Accordion for your bench?

Tell us what you're testing and we'll find the right configuration — or say honestly if a standard setup is enough.

Book a demo of Probe

Show us your board — we review it and go through the findings together.

Prefer to email? info@esharp.se