# Quick start – Accordion A2

> Unbox, start and get going with the Accordion A2 and its built-in web interface, the Accordion Pilot Web UI — from any browser.

_Source: E-Sharp (esharp.se) · Accordion Plattform_


This guide covers what is included when unboxing your Accordion A2, how to start the device, and how to get started with its graphical interface, Accordion Pilot Web UI, from a web browser.

## Web resources

| Title | Comment |
| --- | --- |
| [Accordion Pilot Web UI](/accordion/support/docs/webui-oversikt) | The graphical interface, built into the Accordion from firmware 6.0. Open `http://<host name or IP>/` in a web browser; nothing to install. |
| [PIP package](https://pypi.org/project/accordionq2/) | The Python package for Accordion |
| [Read the docs](https://esharp-accordion-projects-webapiclient-python.readthedocs.io/en/latest/) | Description of the Web API |
| [NuGet package](https://www.nuget.org/packages/AccordionQ2.WebApiClient/) | For .NET users |
| `dotnet tool install -g AccordionQ2.Shell` | Command-line tool for working with Accordion |

You will need a network cable and a PC, tablet or phone with a web browser. Both must be on the same network.

## Unboxing

Inside the box you will find an Accordion device and a USB power supply. The device may have various configurations, so its appearance can differ on the front, back and top.

### Connectors and buttons

The front panel carries the connectors crucial for setup: the network port, a USB-C power port, and four USB-A ports for external devices. The opposite short end has the power button; M.2 modules and expansion interfaces are also positioned here if fitted. The SO-DIMM module connectors are on the top of the device; their design varies by specification.

## Startup

1. Connect the power supply to an electrical outlet.
2. Connect the Accordion to the power supply using the USB-C cable.
3. Connect the Accordion to a network with a network cable.
4. Ensure your PC is on the same network (cable or wireless).
5. Press the power button on your Accordion.

## Getting started with Accordion Pilot Web UI

E-Sharp provides software drivers for the Accordion, accessible through APIs (see Web resources) or the graphical interface, Accordion Pilot Web UI. The Web UI is built into the Accordion from firmware 6.0 — nothing to install. Open a web browser on a device on the same network and enter the Accordion's host name (found on the device) or its IP address, e.g. `http://192.168.0.50/`. The Overview page opens and shows the connection, firmware version and the modules in the Accordion.

The menu on the left leads to every part of the Accordion: channels, power supplies, bus transactions, calibration, alias files, start-up configuration, logs, files and firmware updates. The status bar at the bottom shows the connection and the modules; click a module to show its channels.

### Channels

The Channels page lists every channel of the Accordion with its live value. Each channel corresponds to a specific function or property, and which channels appear depends on the modules fitted. Every column can be filtered, and the search box searches all columns.

Depending on a channel's configuration you can set or read its data. A channel whose direction includes OUT can be set: switch a digital channel on or off with its toggle, or click the value of any other channel, type the new value and press Enter. For example, a channel with ESH10000355 in its name and direction OUT sets the colour of an IDC connector on top of the Accordion — to make it green, click its value and enter `Green`.

Read more in the [Web UI – översikt](/accordion/support/docs/webui-oversikt).
