# Web UI – Configuration

> Alias-filer, start-konfiguration (boot.config) och extensionsmoduler — hur stationens kanaler och hårdvara ställs in via Web UI.

_Källa: E-Sharp (esharp.se) · Accordion Web UI_


Three pages set up how the station's channels and hardware are configured. The **Alias files** page manages the files that name and set up your channels. The **Start-up** page sets what the station applies each time the hardware app starts. The **Extensions** page loads and unloads extension modules. Open them from the side menu.

## Alias files

An alias file is a CSV file that gives your channels their aliases, groups, types, directions, units and other settings. The page lists the alias files stored on the station, each with its **File** name, **State** (**Active**, with the order when several are active), an **At start-up** switch, and an **Activate** button and **⋮** menu.

- **Upload** a `.csv` file (files over 1 MB are refused) — uploading only stores it; it does not change your channels until you activate it.
- **Activate** applies the file now: it can rename channels and change groups/units/descriptions, change channel types and directions, enable/disable channels, and **drive outputs** that have a default value to that value. The change lasts until the hardware app restarts or resets; switch on **At start-up** to keep it.
- **Save current as…** writes the channels' current setup to a new alias file on the station.
- **Download** / **Delete…** a file from its menu.

> Activating a file can drive outputs. Make sure nothing connected to the station can be harmed before you activate.

An alias file has one row per channel with columns **Alias**, **NetName** (identifies the channel), **GroupName**, **Enabled**, **ChannelType**, **Capability**, **Direction**, **DefaultValue**, **Option1–3**, **Unit**, **Description** and **ChannelTypeCapability**. For analog channels, Option1 and Option2 are the calibration gain and offset — leave them empty to keep the unit's own calibration.

## Start-up

The **Start-up** page edits the station's start-up configuration (boot.config) — what the hardware app applies when it starts. You edit a draft (an **Unsaved changes** label shows differences), click **Save…** and confirm; nothing changes on the station until the hardware app next starts (restart it from **System** to apply now). If someone else changed boot.config meanwhile, saving is refused with a **Changed elsewhere** label.

Sections: **General** (apply boot.config at start-up; description), **Alias files** (ordered list; a later file overrides an earlier one), **Modules** (loaded after start-up), **Network** (static IPv4 addresses beside DHCP), **Wi-Fi** (SSID and 8–63-character password; only on hardware with Wi-Fi), **Devices** (USB power on/off; look for audio/video/image devices) and **Services** (applied at every start; the hardware app and the GUI's web service can't be turned off here).

## Extensions

The **Extensions** page lists the extension modules from the station's `modules.config`, each with a **Loaded** switch, **Module**, **Class** and **Assembly**. Switch **Loaded** on to load a module (which resets the hardware it drives and adds its channels) or off to unload it (removing its channels). Loading here lasts until the hardware app restarts; add a module on the **Start-up** page to load it every time.

## See also

- [Web UI – översikt](/accordion/support/docs/webui-oversikt)
- [Web UI – Channel Management](/accordion/support/docs/webui-channel-management)
- [Web UI – Files, Logs & System](/accordion/support/docs/webui-files-logs-system)
- [boot.config-filen](/accordion/support/docs/boot-config)
